ISB 760 Valve Sack Filler

Product Description/Purpose  
The ISB 760 valve sack filler is designed for filling various sizes of sacks. Material is fed into the top by using a loading hopper or a FIBC discharging stand. This equipment could alternatively be installed directly under a mixer. This machine will handle a wide range of products and is available in stainless or mild steel and has a two speed drive. The machine will fill the sack up until the target weight is achieved then it will reduce to a slower speed. The machine is fitted with two load cell for excellent accuracy. All the bearing have a seal and an air gap between themselves and the product this ensures that if a seal breaks product will not enter the bearing. The filler is on 4 castors for maneuverability, and an open frame so the machine is easy to clean and there is nowhere for product to build up unnoticed. At the inlet of the filler there is a valve to help control more fluid products. 



SPECIFICATION  
1. Power supply - 415v 3 phase and neutral.
2. Dimensions - 1360H by 900E by 850W
3. Feeder - Single start auger
4. Fill speed - Depends on the product and accuracy required
5. Accuracy - + or — 1/2 depending on the product.
6. Capacity - Up to 50KG

OPERATION  
The required weight is first programmed into the controller. A valve sack is placed on the valve sack hanger and the filler is then started. The filler will run at the first speed until the first required weight is reached, once this is reached the filler will slow down to the second speed and then stop when the final weight is reached. The filled sack is now removed and another one place onto the hanger, starts again.
​
MAINTENANCE  
The ISB 760 valve sack filler is easy to maintain due to all the grease points for the bearings are sited at the front of the machine. There is only one guard covering all moving parts and this re-moved by extracting 4 - M6 screws. There is also a window in the guard for the inspection of the belts, seals and bearings. 

---